STOCK IMAGE
Auction Ended
CP2112 USB to Serial Adapter USB2.0 USB to I2C Communication Module CP2112 GPIO 4.0~5.25V HID USB-to-SMBus API Specification Multifunction Serial Adapter Module
Sold
Good Condition
QTY 1
$0.05
MSRP
MSRP is a sample online retail price.
$32.00
Last Update:
05/16/2024, 7:55 AM ESTItem Information
MSRP:
MSRP is a sample online retail price.
$32.00
Brand:
JESSINIE
Condition:
Good Condition
Description:
Single chip HID USB to SMBus main bridge Integrated USB transceiver; No external resistor or crystal required SMBus master equipment GPIO can be configured as input/output and open drain/push-pull 512 byte SMBus data buffer Integrated 194-byte one-time programmable ROM for storing customizable product information On-chip power-on reset circuit On-chip regulator: 3.45V output USB peripheral function controller Comply with USB specification 2.0 standard; Full speed (12Mbps) Support USB suspend state via SUSPEND and/SUSPEND pins HID interface Standard USB devices do not require custom drivers Supported by Windows, Mac and Linux Open access interface specifications Windows, Mac, and Linux HID to SMBus Library API for rapid application development SMBus configuration options Configurable clock speed Device address: 7-bit value, that is, the slave device address of CP2112. The device will only ACK this address, but will not respond to any read/write requests Read/Write Timeout SCL low timeout Retry counter timed out GPIO interface characteristics 8 GPIO pins with configurable options Can be used as input, open drain or push-pull output Configurable clock output for external devices 48 MHz to 94 kHz Switch LED during SMBus reading Switch LED during writing to SMBus Supply voltage Self-powered: 3.0 to 3.6V USB bus power supply: 4.0 to 5.25V I/O voltage: 1.8V to VDD Temperature range:-40 to 85°C
Lot Code:
ORG6358587
Width:
4.6 inches
Depth:
0.5 inches
Weight:
0.1 pounds
Length:
7.0 inches
Additional Info:
Good Condition
Pickup Location:
1200 NW O Street, Richmond IN 47374
Auction Number
RIN2401124
