STOCK IMAGE
1 days 9:45:57
for iPhone 12 Pro Max Screen Replacement, 6.7 inch 3D Touch LCD Display Full HD Repair kit Genverdix, Digitizer Assembly with Tools Set, Tempered Glass Screen Protector, Waterproof Frame Adhesive for 12 PRO MAX
New/Like New
QTY 1
$0.00
MSRP
MSRP is a sample online retail price.
$29.89
Last Update:
02/11/2026, 9:41 AM ESTItem Information
MSRP:
MSRP is a sample online retail price.
$29.89
Condition:
New/Like New
Description:
PLEASE NOTE: This item is only compatible with iPhone 12 Pro Max 6.7 inch. Model number on the “About” page: A2342, A2411, A2412, A2410. The screen replacement does not include the following: Ear Speaker, Front Camera, Proximity Sensor, and LCD Metal Back Plate. Please transfer these from your old screen. Installation: Here are some tips during installation: 1. Please disconnect the battery flex cable from the device before installing the new screen. Failure to do will result in the screen not turning on. 2. Do not apply pressure to the corners of the LCD panel. 3. The screws are all different lengths, make sure they are reinstalled back into its original location. 4. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector. 5. Be gentle to the flex cable connectors when removing and installing them. DO NOT over-bend or use excessive force which can tear the flex cable. 6. Confirm the iPhone is powered off before installation and confirm if the pin of the new screen is deformed. 7. Treat all the cables GENTLY. 8. If the screen does not work, the cable may be connected incorrectly. Please reinstall the cable. 9. Please carefully tear off the protective film on the back cover, too much force will break the cable. 10. Please keep the pin and iron piece clean, if there is dust, it will lead to a yellow circle or vertical line. 11. Please use a hairdryer to heat the edges before removing the original screen and earpiece to prevent potential screen damage caused by forceful disassembly. Problem Solution : If problems occur after installation, for example: cannot turn on, no touch, no home button function, flashing, lines on screen etc. Please make sure flex cable connectors are properly connected to the logicboard and double check all flex cables is in good condition. Then turn off and on the phone. Package Include : 1 x Genverdix LCD screen replacement 1 x Repair Tools Set 1 x Tempered Glass Protector 1 x Waterproof Adhesive If there are any damage or dissatisfaction once receiving the product, please contact us immediately and do not install the item. For any issues, questions, welcome to contact us as soon as possible and we will provide you with a satisfactory solution.
Lot Code:
BRN2568280
Additional Info:
New/Like New
Pickup Location:
204 Peterson Drive, Elizabethtown KY 42701
Item Location:
ETN - Auction Pickup Center
12 - Aisle
09 - Bay
03 - Level
Auction Number
ETN2600568
