Good Condition

The suction cups soak in boiling water for a few minutes and clean the suction cup for better results. You need to clean the glass or other smooth surface with water or rubbing alcohol before applying. How to open the Candle? Take off the battery save insulating tab from the remote "Turn clockwise switch on the bottom to ON. The candle will open until you manually turn counter clockwise the switch to OFF. ON-OFF button: Open the Candle On=Off(Note:Before you use the Remote Control, switch the ON-OFF button to ON at the buttom of the LED candles) MODE:There are two modes for the candle light. between flicker mode and steady light.candle mode for flicker, light mode for not flicker .the remote at the candles and pressing the "Candle" button.Press "Candle'' to get flickering light and press" Light" to get steady light. Dimmer: 2 adjustment: Use these two dimmer buttons to change the brightness of the candle.Each dimmer.button could be change light brightness by twice.Left button to lower the brightness Right button to increase brightness.If the flame doesn't flickering after you press "light" button, press + to increase .brightness to maximum Specification 1. Materials: ABS 2. Measurements: Each candle measures approx. 0.9" diameter, H8" 3. Flash mode: Warm white flicker 4. LED color: Warm white 5. Remote: 10 keys 6. Remote battery: 1-CR2025 (included) Remote control instructions 1. ON/OFF: to control the candle light on or off 2. Timer: 2/4/6/8 hours; When it switches to 2H, the tealight lights up for 2 hours on and then automatically turns off for 22 hours. 24-hour cycle, same use on other timers (4/6/8 hours). 3. Mode: On the "candle" position, it will light but would flicker flame; On the "light" position, no-flicker, just like real flame. 4. Dim: This two switches could control the candle light brightness

GRA3572220

Good Condition

5865 Chantry Drive, Columbus OH 43232

COL - Auction Pickup Center 17 - Aisle 09 - Bay 03 - Level