?U/D

New/Like New

Using Methods 1.Clean the dent with a clean wet cloth; 2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3.Use a proper drawing gasket. Large dent requires a large drawing gasket (Note: The larger thedrawing gasket is, the larger the drawing force is); 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; 8. Clean the repaired place with a clean wet cloth. Features: Made of high quality material, solid, durable, less deformable. Special designed tool for the dent of all kinds of flat metal, such as the surface of automobile metal plate. It cannot work alone, it should work with hammers,glue gun and other accessories. Save more time and money, and don't need wait for car dent repairing in repairing shop. Frosted rough surface for better adhesion, easy to operate. Package including: 1 × 2 In 1 T-bar Puller(long and short type) 10 × blue tabs 12 × pink tabs 2 x Stainless Steel Grooves 2 x Short Puller Lines 2 x Long Puller Lines

TEA4154945

New/Like New

333 West Seymour Ave, Cincinnati OH 45216

SMR - Auction Pickup Center 05 - Aisle 23A - Bay 03 - Level