Good Condition

PRODUCT DESCRIPTION ZipWall created the dust barrier category in 1997 with a wide range of innovative products, just like the ZipWall Dust Barrier Poles. These poles are equipped with telescoping, spring-loaded and twist locking technology and include non-marking heads and plates to secure the barrier and hold it firmly in place. With stainless steel construction, these poles can be extended up to a height of 10 feet and are easily portable. A ZipWall Dust Barrier System can be set up by one person in minutes without tape, ladders or damage. The complete ZipWall Dust Barrier System includes accessories to create entries in the barrier, form tight seals at the ceiling, walls, and floor, easily seal off doors and doorways, and provide comprehensive solutions for containing airborne dust. It is ideal for residential and commercial use during remodeling, renovation and restoration. AMAZON.COM Made of steel, the award-winning ZipWall ZP4 ZipPole Spring-Loaded Poles are available in a convenient four-pack that includes two Standard Zippers and a heavy-duty Carry Bag. This kit will let you create a temporary dust barrier in just a few minutes, without ladders, tape, staples, or furring strips that can damage the walls or the ceiling. It's the ideal convenience pack for contractors, maintenance crews, and home owners. Introducing the Low-Cost ZipPole Spring Loaded Pole Four-Pack Kit with Carry Bag With the ZipPole Four-Pack you can create a dust barrier up to 30 feet long, and you can use the system again and again. The ZP4 includes four ZipPole Spring-Loaded Poles, two Standard Zippers, and a convenient Carry Bag that can hold up to 12 poles. Plastic sheeting is not included. Winner of the Remodeling Show 2009 Best New Product Award The ZipPole product is made of steel for durability and strength. These poles can support up to 80 pounds each, and their height can be adjusted from 4' 2" to 10' 3". They can handle plastic or cloth sheeting up to eight mils thick. In fact, ZipPole products are the winner of the Remodeling Show 2009 Best New Product Award, and they have all the patented features of the original award-winning ZipWall Spring-Loaded Poles. Ideal for a Wide Range of Construction Projects This system is ideal for a wide variety of residential, commercial, and DIY projects that create dust or other potentially harmful debris. These projects include demolition, drywall work, plaster repairs, insulating walls and ceilings, sanding and painting, chimney work, kitchen and bath renovation, and more. Small and lightweight, the ZipPole Four-Pack is easy to handle and can fit in the trunk of a car. Easy to Use, No-Damage Installation ZipWall systems remove the need for tape, staples, glue, furring strips, and ladders when creating a temporary dust barrier. This saves time and it eliminates costly repairs to finished surfaces. Sheeting is securely attached at the top of the pole by sandwiching the material between the interlocking head and plate. The twist-locking telescoping pole lets you raise the sheeting quickly and easily without a ladder. All ZipWall pole systems feature Spring Loading at the top. This lets you lift the pole to tuck the sheeting underneath for easy setup. It also maintains constant tension on the pole, compensating for movement at the ceiling or at the floor if the poles are bumped, or if there is a lot of air movement at the jobsite. The ZipPole barrier system is locked in place with non-skid, non-marking pads at the top of each pole. These pads grab the ceiling like magic. The non-skid GripDisk keeps the foot of each pole and the sheeting locked in position at the floor. Ideal for Dropped Ceilings or When Running Negative/Positive Air Pressure The ZipPole product is ideal for dropped ceilings. Just place the poles so the tops push against the grid. Then, follow the grid until you have created a barrier of desired size. Spring Loading keeps the barrier in position by automatically adjusting the pole height to compensate for any movement of the grid during setup. If you are renovating a space where negative or positive air pressure is required, the non-skid pad at the top of the pole, the non-skid GripDisk under the foot of the pole, and internal Spring Loading will keep the ZipWall dust barrier securely in position. Create a Doorway Easily with the Standard Self-Adhesive Zippers With the two Standard Zippers included in the ZP4 kit, you can create a doorway anywhere in the plastic sheeting. Use one zipper for a simple doorway or place two zippers side by side to create a wide roll-up doorway. The wide doorway makes it easy to move equipment and building materials in and out yet still maintain a dust-tight seal when closed. Easy, One-Person Installation in Just Minutes Using old-fashioned methods, a barrier 30 feet long and 10 feet high would take between one and three hours to erect. With the ZipPole Spring-Loaded Poles, the same barrier can be installed in a matter of minutes. Unlike barriers made with tape, staples, glue, or furring strips, this dust barrier system won't come down unexpectedly or cause damage to finished surfaces. Best of all, you can use a ZipWall dust barrier system again and again. Works with Other ZipWall Products The ZipPole Four-Pack gives you the complete framework for a 30-foot-long sealed workspace. All you need is a roll of plastic sheeting. If you want to enclose a larger space, purchase additional ZipPole Spring-Loaded Poles in the convenient the ZP2 Two-Pack.This ZipPole product can be used with ZipWall's Tight Seal accessories, including Foam Rails, to create a continuous seal along the ceiling. It can be used with the ZipWall Side Pack to create a continuous seal along the walls. Doorways can easily be created with ZipWall's Heavy-Duty or Standard Zippers. If you are working with ceilings over 10 feet tall, you can purchase ZipWall's original 12-foot Spring-Loaded Poles in the handy SLP2 Two-Pack, SLP6 Six-Pack, or Four-Pack Plus Convenience Pack. For cathedral or vaulted ceilings, or ceiling heights over 12 feet, you can also purchase ZipWall's 20-foot KT-20 Spring-Loaded Poles. Protect Children and Property from Lead-Dust Contamination Providing a dust-tight seal around worksites is very important, especially when doing demolition or when renovating an older home that has lead paint. In fact, the Environmental Protection Agency (EPA) mandates that dust be contained when as little as six square feet of lead paint is disturbed in homes or facilities where there are children under six years old. Go to www.epa.gov/lead to get details on the latest lead-safety rules and lead-safe work practices. New EPA laws are an important reason to keep a ZipWall Barrier System on hand. What's in the Box The ZipPole ZP4 Kit includes four 10-foot Spring-Loaded Poles, a box of two Standard Zippers, a 12-Pole capacity Carry Bag, and all necessary adapters, plates, and tethers. FROM THE MANUFACTURER The ZipWall Dust Barrier System can be set up by one person in minutes without tape, ladders or damage. Build a barrier up to 20’ high and as wide as needed using plastic sheeting or ZipFast Reusable Barrier Panels. Our complete system includes accessories to create doorways in the barrier, form tight seals at the ceiling, walls, and floor and to easily seal off doorways, larger openings, and fixtures. The ZipWall Dust Barrier System is ideal for residential and commercial contractors doing remodeling, drywall work, painting, concrete work, lead abatement, mold remediation, and more. See more

PNK1648364

Good Condition

1301 N Dixieland Road, Rogers AR 72756

RLG - Auction Pickup Center 28 - Aisle 10 - Bay