Good Condition

Why Replace It? 1.Damage or Breakage: Metal Fatigue: This is the most common cause. The hinge arms endure significant torsion and tension during ladder extension and retraction. After years of repeated use, the metal fatigues, eventually developing cracks or complete fractures at stress points (typically near bends or holes). Physical Impact: During installation, use, or storage, hinge arms may be struck by heavy objects or accidentally bumped, leading to bending, deformation, or breakage. Overloading: Occasionally subjecting the ladder to loads exceeding its weight rating (e.g., carrying heavy items upstairs) may overload the hinge arms, causing deformation or damage. Corrosion: In humid attic environments, if the protective coating on the hinge arm metal is damaged or the material itself has poor rust resistance, corrosion may occur. Rust weakens the metal, making it brittle and more prone to breakage under stress. 2.Wear and Tear: Pivot Point Wear: Pivot holes or pins connecting hinge arms to ladder rungs (steps) and other components wear down over time. Excessive wear enlarges holes, causing looseness, wobbling, abnormal noises, and potentially compromising the ladder’s stability and alignment—eventually leading to failure. Bending Deformation: Continuous stress or overloading may cause slight bending or deformation of hinge arms, hindering smooth operation or affecting the ladder’s structural integrity. 3.Safety: The primary reason for replacement is safety! Damaged, broken, or severely worn hinge arms are extremely hazardous. They may suddenly fail during ladder use, resulting in: Sudden collapse or folding: Users may fall from height, causing serious injury. Jamming or malfunction: Inability to safely extend or retract the ladder. If any signs of cracks, deformation, severe corrosion, or excessive wear are detected, immediately stop using the ladder and replace the hinge arms. Must never risk it. 4.Functional Failure: Damaged or deformed hinge arms can prevent smooth extension/retraction, cause wobbling or abnormal noises during use, and compromise normal operation. 5.Loose Components: While not always due to hinge arm damage, loose screws or rivets securing hinge arms may also cause ladder instability and noise. If tightening fails or screw holes are damaged, replacing the entire hinge arm assembly (typically including fasteners) may be necessary.

PPE4368517

Good Condition

1170 Industrial Park Drive, Vandalia OH 45377

VDL - Auction Pickup Center 18 - Aisle 09 - Bay 03 - Level