New/Like New

Simple operation and high reliability The D&D Living Kick&Fix door stopper is of high quality and designed for many years of use. While standard solutions lose the rubber pad after a few months or the spring no longer transmits the necessary force to the ground, Kick&Fix still retains power from day one. A short step from above on the spring pedal bolts and your self-closing door is fixed to the desired position. Now you have your hands free to load your beverage boxes or ventilate the cellar compartment. To detach the door holder, simply tap the release with the foot. Maximum ground support. Measurements with an accurate crane scale have shown that the Kick&Fix door lock holds the door position 4 times more firmly than standard solutions. The tensile strength was 18.8 kg. The tensile strength for alternative products was between 3.5 kg and 7.9 kg. Three easy assembly steps For assembly, you will need: 1 x cordless screwdriver, 1 x 4 mm metal drill, 1 x cross bit, a little adhesive tape (tesa film). 1. Stick the drilling template with a little tape inside the door. * The eye measurement should be sufficient to stick the stencil approximately vertically. * The distance from the stencil to the floor should be at least 55-85 mm maximum. * Make sure that the side distance on the door leaf is large enough that the door can be closed easily after assembly. 2. With the 4 mm drill bit, pre-drill the three marked holes (through the stencil in the door). 3. Remove the stencil and gently screw the door lock device with the cordless screwdriver, starting with the screw on top. 4.

TEA1401243

New/Like New

1301 N Dixieland Road, Rogers AR 72756

RLG - Auction Pickup Center 10 - Aisle 01 - Bay 04 - Level