Good Condition

Designed for 2.5~5 GPM gas or electric pressure washers up to 4,000 PSI with standard 3/8"FNPT x 3/8"QC Plug, such as Karcher, B&S, Craftsman, Generac, Champion, Simpson, Ryobi, Sun Joe, Greenworks & PowRyte for Professional, industrial, and commercial . FEATURES: Designed and manufactured for professional and industrial use, the application range is fully covered! Unique 2 Layers of High Tensile Wire Braid: ONLY Strength Upgraded By Yamatic, SUPER Tough, abrasion, and kink resistant!DOUBLE DURABLE! Heavy Duty: Much thicker and heavier, don't shake or damaged easily and no leaking. DOUBLE DURABLE! Exile braided reinforcement and Seamless inner tube: Stronger pressure resistant for Resistant Pressure Washer Hose. SPECIFICATION: Hose: 25FT Length, 3/8" Hose ID Maximum Pressure: 4,000 PSI Working Pressure: 4000 PSI - 276 Bar Proof Pressure: 8000 PSI - 552 Bar Burst Pressure: 16000 PSI - Hose Connection: 3/8"Male QC Plug x 3/8"Female QC Socket. Max. Temperature: 60 ~140 /15 ~60 . Weight: 4 lbs. NOTE: If the pressure washer is not used properly, many high-pressure gases or liquids are accumulated inside, which may cause damage to the water pump and Resistant Pressure Washer Hose. Here are the steps to use the pressure washer properly: Before Use: Open the water so that the high-pressure gases or liquids inside the washer is drained Turn on the power and then start to use. After Use: Turn off the power Press the pressure gun to release the internal pressure of washer, gun, and hose Turn off the water Release the hose Turn on the power again, release the internal pressure air and water inside, and then turn off the power.

RDW5309339

Good Condition

701 US-65, Harrison, AR 72601, Harrison AR 72601