EWK

Good Condition

6.5L Manual / Pneumatic 10.5L Manual / Pneumatic 15L Manual / Pneumatic 6.5L Manual 10.5L Manual 6L Manual SKU No. EB0103 EB0297 EB0244 EB0280 EB0296 EB0261 Vacuum Method Manual / Pneumatic Manual / Pneumatic Manual / Pneumatic Manual Manual Manual Capacity 6.5 L 10.5 L 15 L 6.5 L 10.5 L 6 L Accessories Main Tube 1, Extension Tube 2, Wire 1, Sealing Cap 1 Main Tube 1, Extension Tube 2, Wire 1, Sealing Cap 1 Main Tube 1, Extension Tube 2, Wire 1, Sealing Cap 1 Main Tube 1, Extension Tube 2, Wire 1, Sealing Cap 1 Main Tube 1, Extension Tube 2, Wire 1, Sealing Cap 1 Pump Handle 1, Hose Set 1, Pour Spout 1, Anti-dust Cap 1 Excellent Features Upgraded Extra Long Tubes We Care About Your Needs! We upgrade the tubes length by extending them from 39.9inch to 47.2inch for better working experience and broader applications on more vehicles! Interchangeable Tubes Extend main tube (B) by connecting it with extension tube (C) or (D) to suck up every drop of oil down to the very bottom of the reservoir.Before extraction, make sure the tubes are connected tightly. Limited Line Do Not extract oil over the limit line on the oil extractor to prevent overflow.If the fluid goes over the limit line, it might flow into the vacuum chamber and cause leaking.The fluid should not exceed the limit line either while pouring. Air Control Valve 1/4” NPT quick coupler.In order to maintain the consistent vacuum pressure, please close the air inlet valve while operating in manual mode. Read more Safety Lock Lock the spout securely to avoid any leakage, ensure safe operation and fully seal the container. Spout The eagle mouth designed spout makes it fluent to pour and prevents spilling out. Sealing Cap Keep the tank well-sealed and safe without spillage while you transport the old fluid to the recycling center. Iron Wire Hold up the soft and thin tube strongly when inserting it into the dipstick tube.Clean up the tube after use. Read more Instruction Step 1 Working temperature between 35°F-175° F. To make the extraction job smooth and easy, evacuate the oil while it is warm. Step 2 Remove the oil dipstick and insert the connected tube into the dipstick pipe until it reaches the bottom of the oil pan. Step 3 Connect the 1/4? NPT quick coupler to the air compressor. Set the operating pressure between 40-170 psi.Manual mode: Please keep pumping during extraction to maintain the vacuum to suck out every drop of oil.Intuitive operation without operation manual, easy to use. Step 4 Do Not extract the oil over the limited line to prevent any spilling and leaking.Collect the used fluid to another container and take it to the nearby disposal center for recycling. Read more

5841862604

GRN6617729

10.0 inches

9.9 inches

8.5 pounds

23.0 inches

Good Condition

7405 Industrial Road, Florence KY 41042